JetBox 5300-w
2 LAN, 4 Serial Linux Computer
Overview
Specification
Ordering Information
 Datasheet
Request a Quote |
- RISC CPU low power consumption
- -40~80°C operating temp, fanless
- Linux programming
- Linux customized configuration auto-run via SD card
- 4-port serial: TCP server mode
- Digital I/O controller: 4 DI & 4 DO, DIO scheduling
- SNMP control
- Modbus gateway (optional)
|
Overview
Embedded Linux Ready
Korenix is devoted to the Linux computing and benefits customers by providing the JetBox series with embedded Linux ready system and easy-to-use interface. Compared to general purpose Linux system, embedded Linux is performance-optimized for front-end industrial control.
Linux Auto-run
The JetBox 5300 support Korenix Auto-Run customization setting on SD card. The advanced software feature allows users to configure their own Linux commands once the system is booted. Users only need to store the commands on an “Auto-Run” file and then store it on an SD card. This way they can automatically run specific configurations or run specific applications in the JetBox 5300 embedded computers making the industrial network management easier and more flexible.
RISC-Based Computer with low power consumption
The JetBox5300 is a RISC-based computer with lower power consumption and is stable and reliable. The JetBox5300 carries 2 LAN ports, 2 USB ports, 2 RS232/422/485, 2 RS232, 4 digital inputs and 4 outputs to be the best solution in industrial control.
Dual power inputs
The JetBox 5300 carries dual power inputs to make a power redundancy to reduce the impact of unstable power inputs.
Digital Input & Output
Digital inputs and outputs are widely used in industrial applications such as indicators, alarms, reed switches, or sensors. The compact JetBox carries 4 digital output and 4 digital input channels and work as a front- end control agent.
Modbus Gateway (Optional)
For Modbus control applications, Korenix also provides the optional Modbus Gateway function on the SD card. This value-added software enables serial Modbus RTU (or Modbus ASCII) devices to communicate with Modbus TCP devices. It is an open serial communication protocol based on master/slave architecture and used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA).
Dimension
Top | Overview | Specification | Ordering Information | 
Request a Quote
Specifications
Hardware Specifications
| System |
|
|
|
|
|
|
|
|
| 10/100 Based-Tx RJ-45 connector x2 |
|
|
|
|
|
|
| RS-232 x2, RS-232/422/485 x2 (RJ45 connector) |
|
|
|
USB 2.0 x2 (Host)
Supporting devices: USB flash, wireless dongle |
|
|
|
|
|
|
LED per port:
Link/Activity x2 (Green on/Green blinking)
Full Duplex/ Collision x2 (Orange on/ Orange blinking)
LED per unit:
Power On/off x2 (Green on/off)
SD card x1 (Green plug/unplug)
Power on/off switch x1
Reset button x1 |
|
|
|
| Generates a time-out system reset, 1 sec. |
|
|
|
|
|
|
Single input 5.4W at 12V, 6.72W at 48V
Dual inputs 5.28W at 12V, 7.2W at 48V |
|
|
|
|
| Mechanical |
|
|
| Rugged Aluminum Alloy Chassis, IP31 protection |
|
|
|
|
|
|
|
|
|
| 66(D) x 149 (H) x 120.5 (W) mm |
|
|
|
|
| Environment |
|
|
| -40 ~ 176°F(-40 ~ 80°C)*, 5 to 95% RH |
|
|
|
| -40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH |
|
|
|
FCC class A, CE
EN55022 class A
EN55024
EN61000-3-2, 3
EN61000-4-2, 3, 4, 5, 6, 8, 11
Shock: IEC60068-2-27 (50g peak acceleration)
Vibration:
IEC60068-2-6 (5g/ 10~150Hz/operating)
IEC61373 (Random/ 5~150Hz/ operating)
MTBF: At least 200,000 hours @25°C |
|
|
|
|
Software Specifications
| Embedded Linux 2.6.21 |
|
|
|
|
|
| ARP, PPP, CHAP, IPv4, PAP, ICMP, TCP, UDP, NFS |
|
|
|
| busybox (telnetd, inetd, udhcp), microcom, setserial, bridge-utils, ethtool, iptables, net-snmp, ntp, openssh, openssl, pppd, ftpd, rp-pppoe, smtpclient, syslogd, goahead web server |
|
|
|
|
Serial Interface
Serial service modes: TCP server
LAN Interface
Ethernet: 10/100 Based-Tx RJ-45 connector x2, auto MDI/MDI-X |
|
|
|
Security:HTTPS, SSH
SNMP: MIB and traps
NTP for time management |
|
|
|
| SD card, USB, Watchdog timer, UART, Ethernet |
|
Top | Overview | Specification | Ordering Information | Request a Quote
Ordering Information
JetBox 5300-w Atmel 180MHz, 12~48V DC, 64MB SDRAM, -40~80℃
All items include:
- JetBox 5300-w
- Serial cable (RJ45 to DB9 male, 150cm)
- Attached 4-pin power terminal block
- Attached 10-pin DIO terminal block
- Attached blanket to cover SD card slot
- Quick installation guide
- Documentation and software CD-ROM
Optional Accessories:
- Additional applications on SD card: SD card capacity is 1G
o SD1G-LM Linux Modbus Gateway
- Wireless dongle
Top | Overview | Specification | Ordering Information | Request a Quote
