JetCard 2215
4 PoE, 1 LAN, 12~24V Booster Switch Universal PCI Card
|
Overview
Specification
Ordering Information
 Datasheet
Request a Quote |
- Support 32 bit Universal PCI bus
- 5 ports RJ45 Ethernet Switch
- One 12~24V DC input powers PCI card and PoE ports
- 4 ports PoE, IEEE 802.3af compliant, deliver 15.4W per port
- Unmanaged switch function
- IEEE 802.3 10 Base-T and 100 Base-Tx compatible
- Full or half duplex at 10/100 Mbps
- IEEE 802.3u Auto-Negotiation supported
|
Overview
The JetCard 2215 is a flexible and high performance five-port Ethernet PoE switch card in Universal PCI format. The easy-to-install drivers that come with JetCard make it easier for you to set up your complex system. JetCard 2215 is ideal embedded networking solution for industrial applications.
12~24V DC Power Module to power system and PoE Function
On board power module to adopt 12~24V DC input and then provides +3.3V and +5V for PCI card system use and boosts to 48V for PoE function.
IEEE 802.3af Power over Ethernet
The JetCard is IEEE802.3af standard compliant and works as a PSE (power sourcing device) to deliver 15.4W per port.
Unmanaged Ethernet Switch Function
The JetCard 2215 uses Marvell 88E6065 chip to provide 5 Ethernet ports. Each Ethernet port in the JetCard offers IEEE 802.3 10 Base-T and 100 Base-Tx compliant Ethernet data transmission with auto MDI/MDI-X and auto-negotiation.
Auto MDI/MDI-X
The JetCard automatically determine whether or not it needs to interchange cable sense between pairs so that an external crossover cable is not required. If the JetCard interoperate with a device that cannot automatically correct for crossover, the JetCard makes the necessary adjustment prior to commencing Auto-Negotiation.
Flow control
The JetCard supports back- pressure and pause frame-based flow control schemes to ensure zero packet loss under temporary traffic congestion.
Dimensions (Unit -mm)
Top | Overview | Specification | Ordering Information | 
Request a Quote
Specifications
| Technology |
|
|
IEEE802.3 10 Base-T
IEEE802.3u 100 Base-Tx
IEEE802.3x flow control and Back Pressure
IEEE802.3af PoE |
|
|
|
| Store and Forward architecture |
|
| Interface |
|
|
|
|
|
| 5 Ethernet ports (4 ports use RJ45 connectors and support PoE function; 1 port use both RJ45 & JST connectors and is reserved for internal connection) 10 Base-T/ 100 Base-Tx with auto MDI/MDI-X Auto-negotiation |
|
|
|
| assigned by Universal PCI plug and play |
|
|
|
Windows NT/2000/2003/XP,
Linux 2.4.x/Linux 2.6.x |
|
| PoE Technology |
|
|
detection, class ID 0~3 follow
IEEE802.3af standard |
|
| PIN assignment (RJ45 connector): |
|
V+ (Pin 4,5), V- (Pin 7,8),
Tx (Pin 1,2), Rx (Pin 3,6) |
|
|
|
| The control mode supports IEEE802.3af standard. The maximum DC power delivery on each each PoE is 15.4W@DC 48V input |
|
| Hardware |
| Communication Controller: |
|
| Realtek RTL 8139C+ Marvell 88E6065 |
|
|
|
|
|
|
| 10 Base-T: 4-pair UTP/STP Cat. 3,4,5 cable (100m)
100 Base-Tx: 4-pair UTP/STP Cat. 5 cable (100m) |
|
|
|
|
|
|
|
| Performance |
|
|
| 14,880bps for Ethernet and 148,800bps for Fast Ethernet |
|
|
|
|
|
|
|
|
|
|
| Power Requirements |
|
|
DC 12~24V (ATX 4P connector) for system
use and PoE function |
|
|
|
|
| Environmental |
|
|
| -20 to 70°C (-4 to 158°F), 5 ~ 95% RH |
|
|
|
| -40 to 80°C (-40 to 176°F), 5 ~ 95% RH |
|
| Regulatory Approvals |
|
|
CE, FCC Class A (Surge:0.5KV; ESD contact
4KV; Air 8KV) |
|
|
|
|
Top | Overview | Specification | Ordering Information | Request a Quote
Ordering Information
JetCard 2215 4 PoE, 1 LAN, 12~24V Booster Switch Universal PCI Card
All items include:
- JetCard 2215
- DC Connector Cable, ATX R4 pin to L4 pin, 30cm
- Quick installation guide
- Documentation and software CD-ROM
Top | Overview | Specification | Ordering Information | Request a Quote
